SETUP MT AVEE
Getting started with Avee is quick and eas y, you will be able t o start using your system in flight in no time! Follow the simple instru ctions below to setup your Avee products with your ANR headphones for use in your aircraft.
STEP 1: UNPACK YOUR COMPONENTS
Unpack your Avee kit, it should include the f ollowing
1X Microphone Add-On (with magnetic adhesive
1X Aircraft adapter cable
1X 3M cleaning wipes
STEP 2: PREPARE YOUR HEADPHONES
Grab your ANR headphones and the 3M cleaning
wipe supplied in your kit. Unwrap the cleaning sw ab
and clean the base o f your left headphone including
the area surrounding the input jack. E nsure that you
remove any residue that is adhered to the
STEP 3: CONNECTING YOUR MICROPHONE ADD-ON TO YOUR HEADPHONES
The Avee add-on is securely fastened to the headset with a small black adhesiv e strip. Embedded within the strip are two small magnets with their conterparts inside the microphone add-on base. The discrete adhesive strip provides a secure connection ensuring your add-on does not detach from the headphones du ring use. The magnets allow you to easily attach and detach the microphone add-on when required.
Remove the adhesive strip protective backing from the add-on base before connecting your microphone add-on to the headphones.
Guide the add-on t o the base of the left headphone and firmly press it in place. Once attached, carefully unplug it to reveal the adhesive tape applied to the headphones. Press firmly on the tape t o ensure all edges of the tape have adhered to the headphones.
The adhesive tape requires 24-72 hours to cure, this will ensure maximum adhesion. We recommend keeping the add-on disconnected from the headphones for at least 24-hours to provide uninterrupted curing time.
YOUR SETUP IS COMPLETE!
Head over to the Using Avee page to learn more about using our products in your aircraft. Using Avee
USING YOUR AVEE PRODUCTS
Using Avee is simple and automated . At the base of your Microphone add-on you have two control
buttons and a LED no tification light in the centre. Follow the simple general function commands below
to adjust your audio settings. When the add-on is no long er in use it will keep all previous volume levels
set for the next use.
Press + or – to adjust and se t the volume of the speaker audio. The volume control has levels between 20% and 100% . When it reaches the minimum or maximum volume the LED light in the centre will blink rapidly.
Press and hold both + and – butt ons simultaneously for 2 seconds. When the microphone volume is ready to adjust the LED light will blink twice every second. Press the + or button to set the microphone volume. The volume control has levels between 20% and 100%. After 20 seconds the add-on will automatically transition from this mode to the standard speaker volume mode.
RESET TO FACTORY SETTINGS
Press and hold both + and – butt ons simultaneously for 10 seconds. The LED light will flash for 5 seconds as it resets all audio se ttings. When the reset is complete the light will stop flashing.
If mono sound is de tected from the aircraft, it will be available in both sides of the headset.
EXCHANGING YOUR AIRCRAFT CABLE
If you have multiple aircraft adaptors Avee provides a simple way to plug-and-go when changing between different adaptor types. Simply disconnect the cable from the add-on and plug in another in the empty slot.
TELL US ABOUT YOUR EXPERIENCE!
We would love to hear what you have to say about Avee. Head over to our feedback page to tell us about your experience with our products. Share Feedback